Header--Sink-&-wash-unitsback-bar-page-header


WEBSITE---backbar-logoSink & Wash Units.

CED’s Backbar sink/ wash units are versatile, pre-engineered interconnecting modular units, produced in durable 0.9 mm thick 430 gd. steel panelwork, with 1.2mm thick 304 gd. s/steel worktops.
The complete range of Backbar single/double sink units, hand wash and blender station base units are supplied with mixer taps, plug and 38 mm (1 1/2″) waste connection, ready for speedy site connection.
Complementary drainer top bridging units can also be included in a wet area layout by selecting from modules with under-shelf storage, glass rack storage or under-counter flush-fitting roll-under bins.website---sink-&-wash-unit-

Sink & Wash Unit Types

Drainer Units

Drainer Top Shelving Unit (Steel Shelf Type)WEBSITE---backbar-logo
Features.

    • S/steel modular open shelf backbar drainer top unit c/w solid s/steel pressed drainer worktop, drain top waste connection & 3 levels of solid s/steel storage shelving under.
    • Suitable for wet area working locations within a bar run.
    • 304 gd. 1.2mm thk. s/steel recessed ‘drainer’ worktop & durable 430 gd. 0.9 mm panel work construction.
    • Available in 450, 650, 800 and 1000 mm lengths.
    • Unit size: 560 mm deep, 945 mm high – including 95 mm rear worktop up stand.
    • Supplied with 3 no. levels of removable adjustable height s/steel support shelving.
    • Anti drip mould to all edges of recessed drainer worktop.
    • Worktop drain fitted with 38 mm (1 1/2″) waste connection and rear panel waste access.
    • Supplied with 1 no. leg set – consisting pair of nylon feet adjustable +/- 25 mm for final alignment on site.
    • Additional bridging leg sets available to suit required bar layout.
    • Waste traps & waste pipes are not supplied.

Drainer Top Shelving Unit (Steel Shelf Type)  
Dimensions

Code

Unit Length (mm)

DTS45

450 mm

DTS65

650 mm

DTS80

800 mm

DTS100

1000 mm

 

Drainer Top Shelving Unit (Rack Shelf Type)WEBSITE---backbar-logo
Features.

      • S/steel modular open shelf backbar drainer top unit c/w solid s/steel pressed drainer worktop, drain top waste connection & 3 no. PVC coated glass storage racks on removable s/steel drip tray support shelving.
      • Suitable for wet area working locations within a bar run.
      • 304 gd. 1.2mm thk. s/steel recessed ‘drainer’ worktop & durable 430 gd. 0.9 mm panel work construction.
      • Available in 450, 650, 800 and 1000 mm lengths.
      • Unit size: 560 mm deep, 945 mm high – including 95 mm rear worktop up stand.
      • Supplied with 3 no. PVC coated glass storage racks on removable s/steel drip tray support shelving.
      • Anti drip mould to all edges of recessed drainer worktop.
      • Worktop drain fitted with 38 mm (1 1/2″) waste connection and rear panel waste access.
      • Supplied with 1 no. leg set – consisting pair of nylon feet adjustable +/- 25 mm for final alignment on site.
      • Additional bridging leg sets available to suit required bar layout.
      • Waste traps & waste pipes are not supplied.

Drainer Top Shelving Unit (Rack Shelf Type)
Dimensions

Code

Unit Length (mm)

DTS45W

450 mm

DTS65W

650 mm

DTS80W

800 mm

DTS100W

1000 mm

 

Sink Units

Single Sink UnitWEBSITE---backbar-logo
Features.

CaterTap 500MDW

      • S/steel modular open shelf backbar single sink unit c/w s/steel pressed left hand drainer section & bowl worktop, 1/2″mixer tap, valance panel & solid s/steel base storage shelf under.
      • Suitable for wet area working locations within a bar run.
      • Supplied loose – wall mounting (1/2″) swivel spout mixer tap, plug/chain & 38 mm (1 1/2″) waste connection.
      • 304 gd. 1.2 mm thk. s/steel recessed bowl/worktop & durable 430 gd. 0.9 mm panel work construction.
      • Available in 450, 650, 800 and 1000 mm lengths.
      • Unit size: 560 mm deep, 945 mm high – including 95 mm rear worktop upstand & pre-formed tap hole.
      • Supplied with front valance panel & solid s/steel base storage shelf under.
      • Anti drip mould to all edges of recessed bowl/ drainer worktop.
      • Sink bowl unit supplied with rear panel drain waste connection access.
      • Supplied with 1 no. leg set – consisting pair of nylon feet adjustable +/- 25 mm for final alignment on site.
      • Additional bridging leg sets available to suit required bar layout.
      • Waste traps & waste pipes are not supplied.
      • Model SSU45 (450 mm long) supplied with sink bowl top only. (No drainer section)

Single Sink Unit
Dimensions

Code

Unit length (mm)

SSU45

450 mm

SSU65

650 mm

SSU80

800 mm

SSU100

1000 mm

Double Sink UnitWEBSITE---backbar-logo
Features.

CaterTap 500MDW

      • S/steel modular open shelf backbar double sink unit c/w s/steel pressed double bowl worktop, 1/2″mixer tap, valance panel & solid s/steel base storage shelf under.
      • Suitable for wet area working locations within a bar run.
      • Supplied loose – wall mounting (1/2″) swivel spout mixer tap, plug/chain & 38 mm (1 1/2″) waste connection.
      • 304 gd. 1.2 mm thk. s/steel recessed double bowl/worktop & durable 430 gd. 0.9 mm panel work construction.
      • Available in 650 and 800 mm lengths only.
      • Unit size: 560 mm deep, 945 mm high – including 95 mm rear worktop upstand & pre-formed tap hole.
      • Supplied with front valance panel & solid s/steel base storage shelf under.
      • Anti drip mould to all edges of recessed bowl worktop.
      • Sink bowl unit supplied with rear panel drain waste connection access.
      • Supplied with 1 no. leg set – consisting pair of nylon feet adjustable +/- 25 mm for final alignment on site.
      • Additional bridging leg sets available to suit required bar layout.
      • Waste traps & waste pipes are not supplied.

Double Sink Unit
Dimensions

Double Sink Unit – Model Sizes.

Code

Unit Length (mm)

DSU65

650 mm

DSU80

800 mm

 

W.H. Basins

Wash Hand Basin UnitWEBSITE---backbar-logo
Features.

CaterTap 500MDW

 

      • S/steel modular open shelf backbar hand wash unit c/w s/steel pressed bowl on plain top worktop, 1/2″mixer tap, valance panel & solid s/steel base storage shelf under.
      • Suitable for wet area working locations within a bar run.
      • Supplied loose – wall mounting (1/2″) swivel spout mixer tap, plug/chain & 38 mm (1 1/2″) waste connection.
      • 304 gd. 1.2 mm thk. s/steel recessed bowl/worktop & durable 430 gd. 0.9 mm panel work construction.
      • Available in 350 and 450 mm lengths.
      • HWU35 model features 225 mm diameter x 160 mm deep hand wash bowl
      • HWU45 model features 300 mm diameter x 160 mm deep hand wash bowl.
      • Unit size: 560 mm deep, 945 mm high – including 95 mm rear worktop upstand & pre-formed tap hole.
      • Supplied with front valance panel & solid s/steel base storage shelf under.
      • Anti drip mould to front edge of worktop.
      • Hand wash unit supplied with rear panel drain waste connection access.
      • Supplied with 1 no. leg set – consisting pair of nylon feet adjustable +/- 25 mm for final alignment on site.
      • Additional bridging leg sets available to suit required bar layout.
      • Waste traps & waste pipes are not supplied.

Wash Hand Basin Unit
Dimensions

Code

Unit length (mm)

HWU35

350 mm

HWU45

450 mm

 

Blender Stations

Blender Station Unit.WEBSITE---backbar-logo
Features

CaterTap 500MDW


      •  S/steel modular open shelf backbar blender station unit c/w s/steel pressed bowl on plain top worktop, 1/2″mixer tap, operator side blender shelf, valance panel & solid s/steel base storage shelf under.
      • Suitable for wet area working locations within a bar run.
      • Supplied loose – wall mounting (1/2″) swivel spout mixer tap, plug/chain & 38 mm (1 1/2″) waste connection.
      • 304 gd. 1.2 mm thk. s/steel recessed bowl/ worktop & blender support shelf. Durable 430 gd. 0.9 mm panel work construction.
      • Available in 450 and 650 mm lengths.
      • Unit size: 560 mm deep, 945 mm high – including 95 mm rear worktop upstand & pre-formed tap hole.
      • Supplied with front valance panel, solid s/steel base storage shelf & 304 gd. s/steel drinks blender mounting shelf.
      • Anti drip mould to all edges of recessed bowl worktop.
      • Blender Station unit supplied with rear panel drain waste connection access.
      • Supplied with 1 no. leg set – consisting pair of nylon feet adjustable +/- 25 mm for final alignment on site.
      • Additional bridging leg sets available to suit required bar layout.
      • Waste traps & waste pipes are not supplied.

Blender Station Unit.
Dimensions.

Blender Station Unit – Model Sizes

Code

Unit length (mm)

BS45

450 mm

BS65

650 mm

 

Bridge/R. Under Bins

Drainer Top Bridge Unit (With Roll Under Bin)WEBSITE---backbar-logo
Features.

      • S/steel modular open void (or bridging) backbar unit c/w – A) ‘plain top’ solid s/steel worktop or – B) pressed ‘drainer’ worktop & roll under bin.
      • Supplied with open void section to rear and side panels.
      • Supplied with s/steel mobile bottle bin housed within open void.
      • Bin housing supplied withlift off waste container, set of castors & s/steel circular cup handle
      • Available in 450 and 650 mm lengths.
      • 560 mm deep, 945 mm high – including 95 mm rear worktop up stand.
      • Supplied with 1 no. leg set – consisting pair of nylon feet adjustable +/- 25 mm for final alignment on site.
      • Additional bridging leg sets available to suit required bar layout.
      • Suitable for wet area work areas.
      • 304 gd. 1.2 mm thk. s/steel recessed ‘drainer’ worktop & 430 gd. 0.9 mm panels. 430 gd. steel roll under bin.
      • Anti drip mould to all edges of recessed drainer worktop.
      • Worktop drainer supplied with 38 mm (1 1/2″) waste connection and rear panel waste access.

Drainer Top Bridge Unit (With Roll Under Bin)
Dimensions

Specification

Code

Unit Length (mm)

Drainer Top With Roll Under Bin

PTD45

450 mm

PTD65

650 mm

 
 


back-bar-page-header