Tournus-Produ---590-pxl

 

H O L D I N G / R E – H E A T I N G   E Q U I P M E N TTOURNUS_300_rvb

Holding Trolleys – Heated.
Hot-Holding-Trolley-VisualRoll ‘Service temperature holding mobile trolleys are available with the capacity for 5, 10, 15 + 20 level 1/1 GN containers or wire shelving (not supplied). The holding trolleys are either 1/1 or 2/1GN width, dependent on capacity required. Food holding temperature can be controlled between 60-85ºC. Each model is fitted with corner bumpers, transport handles, locking castors and a single leaf solid s/steel or part glazed door.
The range is also available with or without humidification control.
Discover more about these products here.

Holding Trolleys – Cold.
Roll-Fresh-Cold-Trolley-Vis
Roll ‘Fresh fan assisted refrigerated holding trolleys are available with capacity for either 15 levels of 1/1 GN containers (1/1 GN width models) or 30 levels of 1/1 GN containers (2/1 GN width models).
Food holding temperature can be adjusted between 0 – 8ºC. Each model is fitted with corner bumpers, transport handles, locking castors and a single leaf solid s/steel door.
Discover more about these products here.

Reheating Ovens.
Tournus-Reheating-OvensThe TempUp range of reheating ovens are fan assisted with capacity for 5, 7, 10 and 15 level 1/1 GN container or wire shelving (not supplied).
Single & multi-program models are available on stainless steel frames and lower storage shelf. The 5-level oven also comes as a free-standing model.
Discover more about these products here.

Wet Well Heated Bain Marie Trolleys (Manual Fill).small-wet-well-b.-marie-tro
The Tournus wet well, manually filled bain marie heated trolley is ideal for local storage, transport or serving of heated produce. Two sizes are available which accept 2 x 1/1 GN or 3 x 1/1 GN containers up to 200 mm deep (Containers not supplied). Each container is housed in an independent well with sheilded resistance heaters, mechanical thermostatic controls and ‘heat on’ indicator lamps.  The bain marie is mounted on a 30 x 30 mm s/steel frame with a lower steel storage shelf. Protective bumpers are fitted to each corner. A  quarter turn drain is fitted under.
Discover more about these products here.

 

S T O R A G E   E Q U I P M E N TTOURNUS_300_rvb

Rack & Tray Dolleys.
rack-&-tray-dolleys-featureThe Tournus range of stainless steel welded rack and tray dolleys are ideal for volume transport of dishwasher baskets, trays or general purpose use around the kitchen area. The dolleys are available with or without a bolted handle, feature different dimensional base sizes for different storage loads, and are offered with a fixed stainless steel 1.2 mm thick transport base or with a removable ABS tray base.
Discover more about these products here.

Dishwasher Basket Storage.
201-dishwash-basket-trolleyThe Tournus range of stainless steel welded dishwasher basket storage trolleys are ideal for volume storage of dishwasher baskets either horizontally or on end. The horizontal storage version has an 8 tier capacity with 189 mm spaces between tiers. Welded basket runners are fitted to each tier. The model for baskets stored on end has 3 tiers with rear tie bars and 535 mm spacing between tiers.
Discover more about these products here.

GN Container Storage.
201-gn-containert-trolleyGN Container storage trolleys are ideal for draining & storage. They have 4 tiers of removable grids in wired steel, 325 mm between tiers. Removing the 2nd tier allows storage up to 530 mm high.
Discover more about these products here.

Self Help Tray Storage Trolleys.
mobile-3-self-help-tray-troThe Tournus range of stainless steel mobile self help cafeteria tray trolleys are ideal for storage of used food trays. They are available with either 6 or 12 tiers of storage height with either single, double or triple tray storage bays. They are constructed as a 25 mm x 25 mm frame with longitudinal reinforcing bars and Ø 4.8 mm s/steel vertical wire type runner panels, which are welded to the frames and act as the used tray supports. Anti-slide tray clips are fitted to each tier. Trolleys feature annular bumpers & 4 no. Ø 125 mm swivel wheels with polyamide covers, including 2 braked.
Discover more about these products here.

Utensil Hook Stand.
201-utensil-standThe Tournus free-standing utensil stand is constructed as a robust & fully welded mobile s/steel frame. Ideal for a busy kitchen area, it features 12 protruding steel bars for volume utensil storage and Ø 100 mm base castors.
Discover more about this product here.

Utensil Holder/ Preparation Trolley.
201-accessories-holder-trolThis mobile utensil and preparation area trolley features a removable 40 mm deep 1/1 GN container at worktop height, supported on a fully welded mobile Stainless steel frame. The steel frame extends up above the work space to the rear, with 3 convenient horizontal steel bars for local hook-over utensil storage. The trolley is mounted on lockable Ø 100 mm base castors.
Discover more about this product here.

Chef’s Work Station Trolley.
201-chefs-trolleyThe Tournus Chef’s work station is a mobile preparation area trolley, featuring a removable polyethylene cutting board at worktop height, supported on a fully welded mobile Stainless steel frame. The steel frame extends up above the work space to the rear, with a convenient horizontal steel bar for local hook-over utensil storage. The base area underneath provides storage runners for up to 7 no. 2/1 GN Containers, and a lateral steel outer knife scabbard. The worktop area also features an extended frame support with 6 no. 1/6 GN polycarbonate garnish containers, 100 mm deep. The trolley is mounted on lockable Ø 125 mm diameter base castors.
Discover more about this product here.

Dough Container Trolley.
201-dough-container-trolleyIdeal for the storage and transport of round or rectangular dough containers and basins, the trolley features 8 tiers of welded bar runners with stops at each end. The storage tiers are mounted to a sturdy welded steel box section frame. The trolley is mounted on lockable Ø 125 mm base castors.
Discover more about this product here.

Flour Container Trolleys.
201-flour-container-trolleyThis mobile stainless steel flour storage container, has 120 litre capacity and comes complete with a 2 part hinged steel lid. The trolley is 725 mm high, features a surrounding protective bumper rail to the perimeter and is mounted on Ø 100 mm swivel wheels. A version is also available with central dividing panel.
Discover more about these products here.

Proving Chamber Euronorm Tray Trolleys.
201-euronorm-baking--trolleA choice of stainless steel storage trolleys are available, for particular use within proving chambers and freezing environments (-40 Deg. C). Designed for heavy loads, they accept 600 mm x 800 mm, 1000 mm x 700 mm & 1000 mm x 800 mm Euronorm sized dough trays & containers (max 73 mm deep). Constructed from 25 mm x 25 mm steel box section, they feature 20 storage tiers, horizontal tie bars and L shaped runners, each fitted with stop ends. The tray trolleys are 1775 mm high with 75 mm depth between storage levels. To ensure maximum storage space within the chamber, the frames are mounted on Ø 125 mm castors, whose turning circle is set within the frame perimeter. Versions are also available with a removable top shelf and the option of braked castors can be added to all sizes.
Discover more about these products here.

GN Container Holding Trolley.
GN-Container--trolleyThe Tournus mobile GN Container trolley is constructed from a robust & fully welded mobile s/steel frame with diagonal cross members for strength. Ideal for ingredient storage in a busy kitchen area, the trolley will accept 2 x 1/1 GN or 1 x 2/1 GN containers and is mounted on Ø 125 mm base castors, 2 of which are braked.
Discover more about this product here.

Breakfast Transport Trolley.
breakfast--trolleyThis 1020 mm high mobile breakfast trolley features an upper steel shelf with perimeter galley rails for transport of breakfast juice glasses, jugs etc. Underneath, two 325 mm wide storage bay columns are provided, each for up to 7 no. 1/1 GN containers. The trolley features a pull handle at worktop height and the worktop is supported by a fully welded stainless steel frame. The trolley is mounted on Ø 125 mm swivel wheels with annular bumpers, 2 of which are lockable.
Discover more about this product here.

Clearing Trolley.
clearing-trolleyThe Tournus clearing trolley is perfect for busy locations such as public or school dining halls. The ergonomic 920 mm high worktop features 3 no. 1/3 GN x 100 mm containers, for used cutlery collection. A waste chute to accept waste bags and removable rubber scrapping ring accommodate food waste, with the remainder of worktop given over for used plate storage. The worktop is supported on a fully welded mobile Stainless steel frame, with radius pull handles to each end. The base area shelf underneath provides additional storage. The trolley is mounted on Ø 125 mm swivel wheels with annular bumpers, 2 of which are lockable.
Discover more about this product here.

Multi-Purpose Trolley.
General-Purpose-trolleyThis mobile s/steel multi-purpose trolley features two solid steel storage spaces, an 850 mm high steel worktop and a low level base shelf, each with a max 100 kg load. The trolley features a pull handle at worktop height and the worktop is supported by a fully welded stainless steel frame. The trolley is mounted on Ø 125 mm swivel wheels.
Discover more about this product here.

Transport (Platform) Trolley.
platform-trolley-2---mainThe Tournus mobile transport trolley is constructed from a robust & fully welded s/steel or lightweight aluminum frame and is available with either open ‘ribbed’ or solid platform base. Ideal for general purpose transport of kitchen equipment such as dish wash baskets, or daily food deliveries in a busy kitchen area, the trolley has a large 1000 mm x 600 mm wide carrying platform and is mounted on 2 no. swivel and 2 no. fixed Ø 160 mm base castors. All feature ergonomic pull handles and welded vertical product stops to rear.
Discover more about this product here.

Meat Hook Trolley.
Meat-hook-trolley---mainThis lightweight, sturdy 1800 mm high aluminium framed meat carcass trolley features an ‘A’ frame hanging rail with Duralinox alloy drip collection tray at the base.  An intermediate tie bar provides structural support to the tin plated meat hooks mounted either side of the top rail. Available in 2 lengths depending on capacity required,  the trolley will feature either 10 or 16 hooks. The trolley is mounted on 2 no. swivel and 2 no. fixed wheels, small model fitted with Ø 160 mm wheels, larger model fitted with Ø 200 mm wheels. Maximum load per model is 600 kg.
Discover more about this product here.

Laboratory Trolley.
lab--trolley---mainThis handy laboratory trolley is perfect for transporting or storing lab equipment, chemical containers, bottles etc. Constructed of 35 mm x  35 mm s/steel tube, the open frame is designed to house either one or two tiers of storage. Storage is provided by removable wired steel bar cages, which lean back slightly to retain items being carried. The trolley is mounted on Ø 125 mm swivel wheels with annular bumpers, 2 of which are lockable.
Discover more about this product here.

 

K I T C H E N   P R E P A R A T I O N   E Q U I P M E N T TOURNUS_300_rvb

Bread Preparation Trolley.
Bread--trolleyWith a 775 mm high x 350 mm wide solid rear steel preparation shelf for bread cutting, this preparation trolley features 2 removable co polyester 2/1 GN ingredient containers, 200 mm deep. The container support runners are mounted to a sturdy welded steel box section frame and the trolley is mounted on Ø 125 mm base castors.
Discover more about this product here.

Vacuum Packed Food Trolley.
Vacuum-Pack-Food--trolleyThis mobile vacuum packed food station has an 850 working height, with polypropylene inlay for food preparation and a perforated steel inlay also.  Mounted under the worktop is a sliding 1/1 GN polypropylene catchment container. To one end of the work station is fitted a folding removable waste bag holder and support shelf, with 50 litre capacity. The trolley is of s/steel construction and is mounted on Ø 125 mm base castors.
Discover more about this product here.

Fish Gutting Trolley.
Gutting--trolleyA dedicated ‘back of house’ fish gutting trolley with an 850 mm high working height, comprising a perforated steel inlay to worktop. Mounted under the worktop is a sliding 1/1 GN polypropylene catchment container. The trolley is of s/steel construction and is mounted on Ø 125 mm base castors.
Discover more about this product here.

Spice/ Garnish Trolley.
Spices--trolleyDesigned to contain a range of spices used in various cooking functions, this stainless steel trolley has a 750 mm high working platform that houses 8 no. removable co polyester containers 1/6 GN size, 100 mm deep. The unit is also fitted with a base shelf, typically used for secondary storage of larger ingredient containers used above. The trolley is of s/steel construction and is mounted on Ø 125 mm base castors.

Discover more about this product here.

 

S E R V I N G   E Q U I P M E N TTOURNUS-logo

Drop In Plate, Glass & Tray Dispensers.

drop-in-plate-glass-&-tray-The Tournus range of stainless steel drop in plate dispensers are adjustable to accept a plate diameter between 180 & 290 mm. They are available as either ambient or heated versions with spring loaded platforms. The heated dispensers are supplied with a transparent polycarbonate lids & remote control switch on a loom. Rectangular drop in versions with spring loaded platforms are also available, for glass baskets and trays.
Discover more about these products here.

Plate Dispenser Trolleys.
The Tournus range of stainless steel mobile plate dispensers are available as either single or twin plate dispenser types, suitable for plate diameters between 180 – 290 mm. They are available as ambient, heated or as a universal-shape type of dispenser.
Discover more about these products here.

Serving Trolleys.
The Tournus range of welded construction mobile serving trolleys are available with either 2,3 or 4 steel storage levels, to suit tray sizes up to 800 mm (L) x 530 mm (W), or 1000 (L) x 600 mm (W).  Each level is produced as a sound-proofed pressed & recessed s/steel shelf, to prevent trays sliding.  All serving trolley frames are made in 25 mm diameter 1.2 mm tube with either 1 or 2 arched pull handles. Serving trolleys also feature 4 swivel castors of Ø 125 mm, made of non-marking rubber. Castors are fitted with polyamide covers, 2 of which are braked. Above each castor is an annular shock absorbing bumper. Maximum load per storage level is 50 kg.
Discover more about these products here.

Glass Basket & Tray Dispenser Trolleys.
glass-&-tray-dispenser-trol
The Tournus range of stainless steel mobile glass basket & tray dispensers are available as open framed or enclosed versions. The tray dispensers are available with either an open platform or with lateral tray guides incorporated either side of the platform.
Discover more about these products here.

Plate Storage & Dispenser Trolleys.
mobile-plate-trolleys-2-mai
The Tournus range of stainless steel welded mobile plate trolleys are ideal for volume storage, selection or transport of plates up to Ø 290 mm. They are available with storage capacity for either 200, 300 or 400 plates, with either single or 2 tier storage levels.
Discover more about these products here.

GN Container Dispenser Trolleys.
GN-Container-Trolleys-Featu
The Tournus range of S/steel GN container dispenser trolleys are ideal for storing or transporting large volumes of loaded GN containers or trays. They have fully welded GN container tray runners and product stops at each end, fitted to either 1/1 GN & 2/1 GN capacity 25 mm x 25 mm s/steel frames.
Discover more about these products here.

GN Container Dispenser Trolleys – Stacking Type.
GN-Container-Trolleys-FeatuWhere space is a premium, the stacking versions of the GN container dispenser trolleys will push together/interlock when empty, to reduce the occupied equipment space.
Discover more about these products here.

GN Container Dispenser Trolleys – Transport Type.
GN-Container-Trolleys-FeatuA 1/1 GN sized vehicle transportation version is also available, with retaining bars and tray stops to hold loaded/ empty containers insitu during transit.
Discover more about this product here.

Euronorm Container /Crate & Tray Dispenser Trolleys.
GN-Container-Trolleys-FeatuA 400 mm x 600 mm, 400 mm x 800 mm & 600 mm x 800 mm Euronorm sized container, crate, tray or dough tray dispensing version is also available, with L shaped runners and stop ends. These typical baking industry models are in a choice of heights and with choice of depths between storage levels to suit. These trolleys will also accept Euronorm sized 585 mm x 410 mm trays.
Discover more about these products here.

Plate-Holders--VisualsWall Mounted Plated Food Holders.
The Tournus wall mounted plated food holders are ideal for temporary holding of plated product in a busy kitchen or restaurant area. Constructed of stainless steel with vertical 25 x 25 mm anodised aluminium tubes, each tube is fitted with polypropylene plate holding arms, these stacking arms can be adjusted in their width to fit plate sizes up to Ø 320 mm. A choice of either single stack (10 plate capacity) or twin stack (20 plate capacity) models are available.
Discover more about these products here.

Plate-Holders--VisualsPlated Food Holding Trolleys. Plated food holding mobile trolleys are also available with sets of stacking plate arms mounted to front and rear of the trolley face.
They are offered with 2 stack (30 plate), 4 stack (60 or 80 plate) or 6 stack (120 plate) capacity and feature a set of Ø 125 mm swivel wheels, 2 braked and a pull handle.
Discover more about these products here.

 

W A S H I N G   E Q U I P M E N T TOURNUS_300_rvb

Soaking Sink Trolleys & Tubs.
soaking-sinks-on-wheels-gro
The Tournus range of mobile polyethylene & steel soaking sink trolleys are ideal for soaking and washing kitchen utensils or large-sized baskets, even ice storage. They are available as 100, 140, 300 , 500 and 600 litre capacity.
Discover more about these products here.

The Soaking Sink Trolley (100 Litre Capacity).soaking-sinks-on-wheels-gro
Sink trolley is 900 mm high and features a 25 mm x 25 mm tubular steel frame and 600 mm (L) x 600 mm (W) x 300 mm (D) steel bowl, with drain plug, quarter turn tap and Ø 42 mm steel discharge drain, set at 130 mm above finished floor level. The soaking sink has annular bumpers & 4 no. Ø 125 mm swivel wheels with polyamide covers, including 2 braked.
Discover more about this product here.

soaking-sinks-on-wheels-groStainless Steel Wheeled Tubs (140 Litre Capacity) are also available in 2 heights : 540 mm (H) and 750 mm (H). Each model has a steel bowl  size of 760 mm (L) x 510 mm (W) x 380 mm (D). The low height model is supplied with strainer grill and overflow plug, the raised platform version mounts on a 25 mm x 25 mm tubular steel frame and has an overflow with lever under and retaining grid within the tank. The tubs are fitted with 4 no. Ø 125 mm swivel wheels with polyamide covers, including 2 braked.  Each model also has a continuous protection bumper fitted to the bowl rim.
Discover more about these products here.

soaking-sinks-on-wheels-groPolyethylene Wheeled Tubs (300, 500 & 600 Litre Capacity) feature an injection moulded tub & drain plug, mounted on 4 no. Ø 160 mm swivel wheels with steel covers, including 2 braked. Tubs are available in 3 sizes : 300 Litre model: 1200 mm (L) x 800 mm (W) x 800 (H).  500 Litre model: 1200 mm (L) x 800 mm (W) x 1100 (H). 600 Litre model: 1300 mm (L) x 910 mm (W) x 870 (H).
Discover more about these products here.

Wash Hand Basin – TS 2000N TS2000N-Electronic-Visual-(
(Infra-Red Tap/ Battery Operated Types).
3 versions of this battery operated TS 2000N Wash Hand Basin are available, the standard electronic control model comes complete with 6 volt batteries – delivering a 3 year service life in between replacement, or 350,000 presses !
Two other versions are available, one fitted with a splash back mounted 500 ml manual soap dispenser and the other version with an integrated 500 ml soap dispenser, fitted on the bowl.
Discover more about these products here.

Wash Hand Basin – TS 2000N TS2000N-Electronic-Visual-(
(Infra-Red Tap/ Mains Electric Types).
3 versions of the mains operated TS 2000N Wash Hand Basin are also available, the standard electronic control model, which comes complete with a transformer for connection to a 230 v single phase electric supply.  Two other versions are available, one is fitted with a splash back mounted 500 ml manual soap dispenser, the other version has integrated 500 ml soap dispenser fitted on the bowl. 
Discover more about these products here.

Janitor Sink Stations.Janitor-visual
The Tournus s/steel mop and bucket station is available either 600 or 700 mm deep, to suit differing mop bucket sizes.
The top tier features a formed steel basin and plug for mop rinsing, with a lower sink area for locating the bucket, whilst filling or emptying.
The lower sink area has a removable perforated steel trivet stand to locate the bucket on. Both zones can be filled from the swivel neck mono-bloc mixer tap. They are supplied with PVC basin trap and strainer waste overflow tube.
Discover more about these products here.

Mobile Wash Hand Basins. Mobile-WHBS--CODES 
The Tournus mobile wash hand basin is a completely self-contained module. The unit is a foot pump operated hand wash sink, with 13 litre water capacity. It is ideal for catering hygiene needs inside hotels, pubs, markets etc. & perfect when mains electricity or hot water is not available – such as outside-catering, B.B.Q.s and events.
The standard foot operated model comes with battery powered pump serving the swivel tap. The unit has soap & paper towel dispensers, towel roll & hook on dustbin.
A second version is available with an integrated electric water heater, for instant hot water (230 V 16 amp 3.7 kw electrical supply required).
Discover more about these products here.

Wash Hand Basin – TS 2000N TS2000N-Knee-Op.Visual
(Knee Operated Tap Types).
3 versions of the knee operated TS 2000N Wash Hand Basin are also available, the standard knee operated model, which comes complete with a push button control paddle positioned on the face of the bowl apron. The knee operated mixer tap also features non return valve and temperature setting.  Two other versions are available, one is fitted with a splash back mounted 500 ml manual soap dispenser, the other version with integrated 500 ml soap dispenser fitted on the bowl.
Discover more about these products here.

Wash Hand Bowls –  ‘GA’  TypeGA-Bowls---Visual
 (Knee Operated Tap).
3 versions of the knee operated GA range of Wash Hand Bowls are available. The standard Ø 275 mm x 115 mm deep bowl model comes complete with shroud, plug hole and 32 mm waste trap, swan neck mixer tap with aerator, pre-mixer, flexible hose connector & a push button tap control, fitted behind a hinged, knee-operated front valance panel.
(Code 806 331)

Two other versions are available, one model fitted with a rear s/steel splash back (Code 806 332), the other model with both splash back & 500 ml manual soap dispenser (Code 806 333). The knee operated swan neck mixer tap supplied has a non return valve and temperature setting.
Discover more about these products here.

GC Wash Hand Basins – ‘GC’ TypeGC-Basins---Visual-NO-CODES 
(Knee Operated Tap).
6 versions of the knee operated GC range of Wash Hand Basins are available, all fitted with a rectangular 345 mm x 245 mm x 120 mm deep basin.
They come complete with shroud, plug hole, 32 mm waste trap, swan neck mixer tap & aerator, pre-mixer, flexible hose connector & push button tap control, fitted behind a hinged, knee-operated front valance panel (Code 806 381).
Three other versions are available, one model fitted with a rear 540 mm high s/steel splash back (Code 806 382).
One model with both 540 mm (H) splash back & 500 ml manual soap dispenser (Code 806 383) and a fourth model, fitted with 540 mm (H) splash back, 500 ml manual soap dispenser and stainless steel bin under (Code 806 397).
Two further versions with a taller 790 mm high rear s/steel splash back are also offered.
One with plain 790 mm high splash back (Code 806 384).
The final version has all standard features, but includes the 790 mm high rear s/steel splash back, a 500 ml manual soap dispenser and a paper towel dispenser (Code 806 385).
Discover more about these products here.

GC Wash Hand Basins (Infra-Red Tap/ Battery Operated).GC-Basins-Infra-Red-Tap---c
This Wash Hand Basin has a rectangular 345 mm x 245 mm x 120 mm deep basin, shroud and is supplied with a battery operated infra-red electronic tap ( Code 806 351). The mixer tap comes complete with 6 volt battery – delivering a 3 year service life in between replacement, or 350,000 presses !

Two other versions are available, one fitted with a 540 mm high s/steel upstand (Code 806 352), the other with 540 mm upstand & rear mounting 500 ml lockable manual soap dispenser (Code 806 353).
Discover more about these products here.

 

S T E R I L I Z I N G   E Q U I P M E N T.TOURNUS_300_rvb

Sterilizing Cabinets.
No-Codes---Sterilizing-CabiTournus s/steel sterilizing cabinets are a neat and hygienic solution to knife sterilization in your kitchen area.
The cabinets are available with either 10, 20 or 40 knife capacity. They feature a UV radiation light with automatic cut-off feature when the transparent acrylic door is opened.
An externally mounted control knob allows the period of UV exposure to be adjusted up to 2 hours. (1.5 hr operating time recommended). The cabinet itself has rounded edges and sloping tops to prevent dust build up or inappropriate storage. The magnetic door features pull handle and steel hinges.
Each cabinet size is available with or without lock – mounted in door frame if required.
The cabinets are IP24 rated and feature various methods of knife storage inside, i.e. magnetized horizontal bar (10 knife capacity), folded steel grid slotted (20 knife capacity) or S/steel wire bar frame (20 + 40 knife capacity).
Each cabinet comes complete with 1.2 m electrical cable and plug top, for connection to a 230v 50 Hz supply ( 15-30 W)
Discover more about these products here.

Insect Killers (Electric).ELECTRIC-insect-kill---visu
Tournus s/steel insect killers are an indoor appliance for the control of winged insects, typically used in kitchen areas.

The cabinets are available as an electric control type or with replaceable glue boards to capture insects. Wall mounted or hanging versions on s/steel suspension chains are also available. 
Electric control models feature actinic flourescent tubes whose UV radiation attracts insects, which are electrocuted on contact with the inner steel wire grids. Inner grids are powered by transformer giving high voltage low intensity current. The electrocuted insects fall into a removable tray in the base, which isolates the unit on removal.
The hanging electric control models range between 40 w & 98 watts, with various combinations of light output/electrocution capacity, depending on the level of M sq. protection required in the environment. An outer protective grid is fitted to both electric or glue board models. Each come with a standard 1.2 M power cable/plug top and require a 230 V 13 A electrical supply. 

Discover more about these products here.

Insect Killers (Glue Board)glue-type-insect-kill---visWall mounted and hanging glue board models feature the same long lasting actinic UV light source, but feature a removable inner glue board to capture insects on. The boards can be slid in and out from the cabinet side. (1 board included in wall mounted, 2 boards included in hanging models).

Discover more about these products here.

Sterilizing Unit.806462
The Tournus wall mounted Sterilizing Unit is a hydraulic spray unit for low pressure cleaning and sterilizing of surfaces and floors. The sterilizing unit is designed for use with 2-5 bar water pressure & comes with a separate detergent can holding frame, for supporting a 5 Lt container, max. load 10 Kg. – container not supplied. The sterilizing unit features a 15 M length of discharge hose c/w anti-shock spray gun & trigger handle.

The detergent suction hose provided (2 M length) has a weighted end filter – the lid of the detergent container can be drilled with Ø 10 mm hole to accept the detergent hose & filter. The detergent hose connects to the unit via a tip inserted between hose and check valve. The incoming 1/2″ water connection is to a 1.5 M long s/steel braded hose (F 1/2″-F 3/4″) supplied.

The outer casing houses a red lever handle (the water inlet valve) and a black, two position lever handle (the detergent flow). Position one is used for the washing operation (which adds detergent), position two is used for the rinsing operation (which prevents detergent flow).  A bag of 14 colour-coded nozzles/valves are also provided, to allow various % detergent dilution levels between 0.5%-10.9% to be set.

Discover more about these products here.

mobile-glass-&-tray-banner